HP X27q Review 2024: Affordable Yet FAST Gaming Monitor (2024)

The HP X27q is one of the most affordable 27″ 1440p IPS high refresh rate gaming monitors with a rapid 1ms GtG pixel response time speed, making it an appealing option for competitive players. Here’s everything you need to know about it.

Image Quality

The HP X27q monitor is based on the same Nano IPS panel that’s used in the popular Dell S2721DGF, but with a different backlight, resulting in lower DCI-P3 gamut coverage.

Update: It seems that some HP X27q units use a different panel by BOE (MV270QHM) with likely inferior performance. Either way, we recommend the Acer XV271U M3 at this price range.

While HP claims 99% sRGB gamut for the X27q model, it actually extends a bit over that with a ~110% sRGB gamut size. So, you will get a bit more saturated colors than normal, but not as much as that of the Dell S2721DGF with ~135% sRGB gamut size.

Sadly, there’s no sRGB emulation mode on the HP X27q, but since the over-saturation is mild, most users won’t see it as an issue as you just get a bit extra color vibrancy. You can use a software solution to clamp the gamut to sRGB.

The IPS panel also provides 178° wide viewing angles, ensuring consistent image quality regardless of the angle you’re looking at the screen.

Further, the HP X27q has a strong 400-nit peak brightness, so it’s able to get more than bright enough even in well-lit rooms.

As expected from an IPS display, the static contrast ratio sits at around 1,000:1, meaning that blacks won’t be as deep as that of VA panels with around 3,000:1 contrast ratio, but VA technology has disadvantages of its own.

Another weakness of IPS monitors is IPS glow; it’s characterized as visible glowing around the corners of the screen at certain angles, but it’s mostly noticeable with dark content in a dark room and a high brightness setting.

IPS glow intensity varies across different units of monitors, but in most cases, it’s negligible or tolerable.

HDR (High Dynamic Range) is supported as well, however, since the monitor doesn’t have the proper hardware for a noteworthy HDR viewing experience, you can ignore it. There are 8 dimming zones, but they’re not very effective.

Next, the WQHD (2560×1440) screen resolution provides plenty of screen space as well as sharp details and text on the 27″ viewable screen of the monitor thanks to the high pixel density of 108 PPI (pixels per inch).

This also means that you won’t have to use any scaling in order to make small text readable, and 1440p is a lot less demanding to drive than 4K UHD, allowing you to maintain higher frame rates.

Performance

Moving on, the HP X27q monitor has low input lag of around 4ms, so you won’t be able to feel or notice any delays between your actions and the result on the screen.

The response time speed performance is excellent as there’s no visible ghosting behind fast-moving objects. There are four overdrive settings, from Level 1 to Level 4. Below 100Hz, we recommend using the Level 1 mode, while for above 100Hz, you can use Level 2 for a bit clearer performance without overshoot.

Further, the monitor supports Adaptive-Sync with FreeSync Premium certification. This technology allows the display to change its refresh rate dynamically and according to GPU’s frame rates. As a result, screen tearing is eliminated without a noticeable impact on input latency up to 165Hz/FPS (Frames Per Second).

The supported variable refresh rate (VRR) range is 60-165Hz. Below 60FPS, LFC (Low Framerate Compensation) kicks in and multiples the frame rate in order to keep tearing at bay (59FPS -> 118Hz). While the HP X27q display is not officially certified by NVIDIA as ‘G-SYNC Compatible’, VRR works without issues with compatible GeForce cards.

Features

Additionally, the monitor supports Motion Blur Reduction via the MPRT feature. This technology uses backlight strobing to reduce perceived motion blur at a cost of picture brightness. However, MPRT cannot be active at the same time as VRR on this monitor.

There are five MPRT settings, allowing you to choose between the image brightness and motion clarity trade-off; the smoother the motion, the darker the screen will be, and vice versa.

Note that for the best MBR performance, your frame rate should match the refresh rate, and that backlight strobing introduces screen flickering that’s invisible to the human eye, but those sensitive to it might get headaches after prolonged use.

When MPRT is disabled, the backlight is completely flicker-free. In addition, there’s an integrated low-blue light filter.

There are four hotkeys used for navigation through the OSD (On-Screen Display) menu of the monitor. We prefer directional joysticks, but this gets the job done as well, though it’s a bit clunkier to use.

Design & Connectivity

The stand of the monitor is robust and versatile with up to 100mm height adjustment, -5°/20° tilt, 90° clockwise pivot and 100x100mm VESA mount compatibility.

Connectivity options include one HDMI 2.0 port (even though some spec sheets online list two ports), one DisplayPort 1.4 input, and a headphone jack.

Note that the HDMI 2.0 port is limited to 144Hz at 1440p (55-144Hz FreeSync range), while the DP 1.4 input allows for 165Hz at 1440p with full 10-bit color depth and 4:4:4 uncompressed signal.

Now, the HP X27q has a peculiar ‘eye-ease’ coating that further reduces harmful low blue-light emission. Alas, this anti-glare coating has a negative impact on image clarity as it makes the picture appear somewhat grainy.

So, unless you have trouble falling asleep after looking at a computer screen, the sacrifice in image quality caused by the eye-ease coating is not worthwhile.

Price & Similar Monitors

The HP X27q price ranges from $225 to $300. At ~$225, it’s one of the cheapest 1440p IPS monitors with 1ms GtG you can get.

However, we recommend the Acer XV271U M3 instead. It can be found for as low as $180 and offers similar image quality and performance with a lighter anti-glare coating that doesn’t affect picture quality as much.

Be sure not to confuse the X27q monitor with the HP 27xq or X27qc models which are based on entirely different panels.

To learn more about monitors and ensure you’re getting the model most suited for your personal preference, visit our comprehensive and always up-to-datebest gaming monitor buyer’s guide.

Conclusion

All in all, the HP X27q is an excellent gaming monitor for the price if you want a 27″ 1440p high refresh rate display with crisp details, vibrant colors and rapid response time speed.

Its peculiar coating might repulse some users, while others won’t be bothered by it at all; It depends on your sensitivity to graininess added by aggressive screen coatings.

Specifications